Three-Dimensional Parameter Display - Sony MVS-8000X User Manual

Button Usable coordinate
space
ASP PERS Source
Target
SHIFT+ Source
ASP PERS

Three-Dimensional Parameter Display

You can check the values of the three-dimensional parameters in the DME
menu.
Displaying the three-dimensional parameters in the DME menu
In the menu control block, select the top menu selection button [DME].
The DME menu appears. The status area shows the three-dimensional
parameters currently controlled by the device control block.
• When multiple DME channels are selected, this shows the parameters for the
reference channel.
• When both Global and Local are selected, the three-dimensional parameters
are shown for the channel (the reference channel) for which the button is lit
green.
572
Three-Dimensional Transformation Operations
Functions assignable to trackball and Z-ring operations
Trackball x-
direction
Change aspect ratio
on x-axis
Shift view point on x-
axis
Change skew on x-
axis
Trackball y- Z-ring
direction
Change aspect ratio Change aspect ratio
on y-axis on x- and y-axes
simultaneously
Shift view point on y- Change distance
axis from view point to
image
Change skew on y- Change aspect ratio
axis on x- and y-axes
simultaneously