Selecting The Transition Type By A Menu Operation - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Selecting the Transition Type by a Menu

You can also select the required transition type by a menu operation.

Selecting the Transition Type by a Menu Operation

In the M/E or PGM/PST menu, select first VF7 'Misc,' then HF1

'Transition.'

The Transition menu appears.

Select the required transition type in the <Transition Type> group.

The parameter settings can now be adjusted with the knobs according to

the selected transition type.

For details, see the following.

• "Super Mix Settings" (page 171)

• "Color Matte Settings" (page 172)

• "Setting the Transition Rate" (page 176)

When multi-program mode is selected in the Setup menu (see "Settings for

Switcher Configuration (Config Menu)" in Chapter 20 (Volume 3)), there

may be cases in which two or more transition types have been selected.