Sony MVS-8000X User Manual page 333

Knob
3
Knob
1
2
3
• When soft edge is selected
Knob
1
• When edge matte is selected
Knob
1
2
3
Buttons for positioning the wipe pattern
POS (position): Adjusts the position of the wipe pattern.
CNTR (center): Returns the wipe pattern position to the center.
When you press the [POS] button, the alphanumeric display first shows the
name of the parameter, "H" or "V," and then the value of the parameter.
When the [POS] button is lit green, you can adjust the position of the wipe
pattern with the control knobs.
Knob
1
2
Buttons for setting the wipe direction
NORM (normal): Sets wipe to normal (forward) direction.
NORM/REV (normal/reverse): Sets the wipe direction to alternate between
normal and reverse for each transition.
REV (reverse): Sets wipe to reverse direction to normal.
Parameter group [1/2]
Parameter Adjustment
O Degree of softening of
outside of border
Parameter group [2/2]
Parameter Adjustment
L Luminance
S Saturation
H Hue
Parameter Adjustment
S Degree of softening of
edge
Parameter Adjustment
L Luminance
S Saturation
H Hue
Parameter Adjustment
H Horizontal position
V Vertical position
Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
Setting values
0 to100
Setting values
0 to 100
0 to 100
359 to 0
Setting values
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
Setting values
–200 to +200
–200 to +200
333