Sony MVS-8000X User Manual page 629

2
Press [Sketch], turning it on.
The Sketch effect is enabled.
3
Select the method for applying outlines in the <Sketch Mode> group.
Sketch: Apply an effect like a sketch.
Edge Color: Enhance the outlines.
Draw: Apply an effect like a line drawing.
Relief: Apply a bas-relief effect.
Sharp: Increase the apparent sharpness.
4
Set the following parameters, according to the method selected in step 3.
• When Sketch is selected
Knob Parameter
1 Mix
2 Clip
3 Gain
4 C Gain
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
• When Edge Color is selected
Knob Parameter
1 Mix
2 Clip
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
• When Draw is selected
Knob Parameter
1 Mix
2 Clip
3 Gain
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
Adjustment
Mix amount for Sketch video and
input video
Reference level for outline
extraction
Image gain for outline extraction
Chroma gain of input video
Adjustment
Mix amount for Edge Color video
and input video
Reference level for outline
extraction
Adjustment
Mix amount for Draw video and
input video
Reference level for outline
extraction
Image gain for outline extraction
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
–100.00 to +100.00
DME Special Effect Operations
b)
b)
b)
629