Creating And Editing A Macro Timeline - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

For details of region assignment operations, see "Assigning a Region to a

Region Selection Button in the Numeric Keypad Control Block or

Multifunction Flexi Pad Control Block" in Chapter 19 (Volume 3).

• On a macro timeline, only macro recall and execution actions are stored. The

data for a macro to be recalled on the macro timeline is not held on the

timeline. It is necessary to create the macro data first.

• A macro timeline can be saved and recalled on the master timeline or a

shotbox register, but cannot be saved as a snapshot.

Creating and Editing a Macro Timeline

This section describes how to set actions, and add keyframe points. Note that

path settings are not needed on the macro timeline.

For details of keyframe operations, see "Creating and Editing Keyframes"

Saving a keyframe

For the operations, use the Macro Timeline menu and the [INS] button in the

keyframe control block.

Press the [EDIT ENBL] button, turning it on.

This enables timeline editing in the keyframe control block.

In the Macro menu, select VF4 'Timeline' and HF1 'Timeline.'

The Macro Timeline menu appears.

Select one of the actions (Recall, Take, Take All, No Action) that appear

on the right.

When you have selected Recall or Take, turn the knob to select the number

of the macro register.

Press the [Set] button.

The selected action appears in the Action column on the left.

Press the [INS] button in the keyframe control block.

This creates the keyframe 1 on the macro timeline.

Selection of macro register

Setting values

Macro Timeline