Secondary Color Correction Operations; Luminance Processing Operations - Sony MVS-8000X User Manual

Secondary Color Correction Operations

For the six colors R (red), G (green), B (blue), Y (yellow), C (cyan), and M
(magenta), adjust the luminance and saturation, and also the hue within a range
of ±30 degrees of the center value for each color.
You can mask a part of the region to be corrected.
Applying secondary color correction
1
In the CCR menu, press VF1 'CCR1' and HF3 'Secondary CCR.'
The Secondary CCR menu appears.
2
In the <Secondary CCR> group, press [Secondary CCR], turning it on.
3
In the <Secondary CCR Adjust> group, select the color for which you
want to make the setting.
4
Adjust the following parameters.
Knob
1
2
3
To return the parameter settings to their default values
In the <Secondary CCR> group press [Unity].
Masking a part of the secondary color correction
Set [Mask] to On in the Secondary CCR menu, then carry out the same
operation as described under "Masking a part of the primary color correction"
(page 460).

Luminance Processing Operations

After converting a signal to which RGB color correction has been applied to a
YUV signal, divide the luminance levels into three regions, referred to as Dark,
Middle, and Bright, and apply video signal adjustments to these regions.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Delay Hue delay
Setting values
–100.00 to +100.00
0.00 to 200.00
–180.00 to +180.00
Color Corrector Functions
463