Sony MVS-8000X User Manual page 427

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Example 2: When a video signal clip is followed by a key signal clip

with the same number of frames (pair file)

Red: red marker frame

Result of extraction:

The section surrounded by red marker frames is extracted as the main file, and

the section surrounded by blue marker frames is extracted as the sub file.

In the case above, one clip file (pair file) is extracted.

a) A red marker frame is a monochrome frame with the RGB signal levels respectively 100%, 0%,

b) A blue marker frame is a monochrome frame with the RGB signal levels respectively 0%, 0%,

• For extraction as a pair file, the main file and sub file must have the same

number of frames.

• For image extraction as an extended clip, [Ext Clip] must be selected in the

Record menu <Record Enable> group when the video tape content is

recorded as a clip.

• For image extraction as still images, [Clip] must be selected in the Record

menu <Record Enable> group when the video tape content is recorded as a

In the Frame Memory >Clip >Record menu, record the tape image as a

For details, see "Using the menu to record clips" (page 409).

In the Frame Memory menu, select VF4 'File' and HF2 'Auto Extraction.'

The Auto Extraction menu appears.

Select a clip (single file) recorded from the tape.

Press [Extraction Start].

A confirmation popup window appears.

Press [Yes].

Blue: blue marker frame

Managing Images Using a DDR/VTR