Last 30%: The transition completes at the end of 70% of the transition
execution time. The transition has a dead zone from 70% to 95% of the
transition time.
Last 5%: The transition completes at the end of 95% of the transition
execution time. When the transition completes, the cropping is
removed during the last 5% (enlarges).
Off: The transition completes at the end of the transition execution time.
During the last 5% of the transition, the transition and cropping
removal proceed together.
Transition
Cropping
"Dead Zone"
t: transition execution time
y: change in transition and cropping amount
DME Wipe Modify Clear
Press [Default Recall] at the lower left of the menu display, turning it on, then
press VF6 'DME Wipe' to return the DME wipe settings to their initial status.
For details of the menu operation to return the DME wipe state to that set in
initial status, see "Returning to default state in function groupings" (page
128).
Transition
Cropping
Basic Procedure for DME Wipe Settings
Transition
Cropping
359