Regions - Sony MVS-8000X User Manual

Regions

The term "region" refers to some sort of functional block of the system.
When saving or recalling snapshot registers and effect registers, or creating or
editing effects, you first select the region to which the operation applies. You
can also select multiple regions simultaneously.
Classification of the regions
The regions are classified as follows.
• Master region
• The following 36 regions
– Switcher: M/E1 to M/E4, PGM/PST, User1 to User8
– DME: DME ch1 to DME ch8 (inclusive of Global)
– External devices: P-Bus, Router, Device 1 to Device 12, GPI, Macro
Only the regions assigned to the region selection buttons of the numeric keypad
control block or Multifunction Flexi Pad control block can be used
simultaneously.
For details of the region assignment to the region selection buttons, see
"Overall Control Panel Settings (Config Menu)" in Chapter 19 (Volume 3).
Regions applicable to keyframe operations
All the regions less the Router region.
Regions applicable to snapshot operations
Twenty-two regions, that is, the above regions less the external devices'
regions (P-Bus, Device 1 to Device 12, and GPI) and the Macro region.
"User" regions
You can optionally assign the following regions to the regions User1 to User8.
The User regions shown in parenthesis are the default assignments.
• Color backgrounds 1 and 2 (User1)
• AUX1 to AUX48 (User2)
• Frame Memory 1 to 8 (User4)
• Color correctors 1 and 2
For details of the User1 to User8 region assignment, see "Setting User
Regions" in Chapter 20 (Volume 3).
Notes on saving or recalling a frame memory still image for or by
a snapshot/keyframe
• The saving and recalling of frame memory images for snapshots and
keyframes is restricted to the still images or clips on the eight frame memory
766
Regions