Applying A Dme Effect To A Key - Sony MVS-8000X User Manual

Knob
2
• When utility 1 bus is selected
Knob
1
2
5
To invert the black and white sense of the mask source, press the [Mask
Invert] button, turning it on.

Applying a DME Effect to a Key

Notes
• On keys 1 to 4 of one M/E, a maximum of two DME effects (including DME
wipes) can be used simultaneously. However, when using a DME wipe
pattern for the background, the restriction depends on the execution mode as
follows.
One-channel mode: DME can only be used in one place on keys 1 to 4.
Two-channel mode or three-channel mode: DME cannot be used for keys 1
to 4.
• When the system signal format is 1080P, and the DME input/output signal
format is set to dual link mode, the following restrictions apply.
– On keys 1 to 4 of one M/E, a maximum of one DME effect (including
DME wipes) can be used simultaneously.
– When a DME wipe pattern is selected for the background, DME cannot be
used for keys 1 to 4.
• On keys 5 to 8 of one M/E, a maximum of two DME effects (including DME
wipes) can be used simultaneously. However, for keys 5 to 8 of the M/E4
block, DME effects cannot be used.
For details, see "Interfacing With External Devices (Device Interface Menu)"
in Chapter 19 (Volume 3).
For keys 5 to 8 on the M/E4 bank, DME effects cannot be applied.
Assigning a DME to a key
1
In the M/E-1 >Key1 menu, select HF5 'Processed Key.'
The Processed Key menu appears.
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Clip Reference level for creating mask
signal
Gain Gain
Setting values
0.00 to 100.00
Setting values
+109.59 to –7.31
–100.00 to +100.00
Key Setting Operations Using Menus
243