Sony MVS-8000X User Manual page 964

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Executing a menu macro

In the Macro >Menu Macro Register >Recall & Run menu, check that you are

not in macro editing mode, then use the following procedure.

To stop execution of a macro

Press [Stop].

To move to the start of a menu macro event

Press [Rewind].

Recalling a menu macro register from a macro register

Menu macro recall and execution operations can be saved as events in a control

panel macro, and then recalled.

If with the control panel in macro editing mode you execute a menu macro,

then this operation is recorded as an event.

For details of recalling operations, use the following references, depending on

the control panel or menu used.

• Using the numeric keypad control block and the keyframe control block:

• Using the standard type Flexi Pad control block: page 921

• Using the simple type Flexi Pad control block: page 929

• Using the Multifunction Flexi Pad control block: page 934

• Using menus: page 944

• To recall the register only, press [Recall x].

Using any of the following methods, specify the event from which you

want to execute.

• Press directly on the menu macro register configuration list.

• Press the arrow keys on the right list to scroll the reverse video cursor.

• Turn the knob.

Press [Run].

This executes the menu macro from the specified event.

Select start event

Setting values

1 and upwards