Snapshot Operations in the Flexi Pad
Control Block
In the Flexi Pad control block (standard type or simple type) on each M/E bank
and PGM/PST banks, you can only carry out operations on snapshots for that
bank. It is therefore not necessary to select a region.
SNAPSHOT button Numeric display
Memory recall section
Flexi Pad control block (standard type)
Banks and Registers
In a standard type Flexi Pad control block or Multifunction Flexi Pad control
block, in order to handle the 99 registers, they are considered in groups. These
groups are called "banks," and there are ten banks, numbered from 0 to 9.
The correspondence between banks and registers is shown in the following
table.
856
Snapshot Operations in the Flexi Pad Control Block
UNDO button
STORE STATS button
Bank selection buttons
Numeric display
Memory recall section
UNDO button
SNAPSHOT button
Flexi Pad control block (simple type)