Sony MVS-8000X User Manual page 233

Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
If you select [Normal], skip to step 7.
3
Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
Knob Parameter
1 Width
3 Density
a) In the "4H mode" and when [Fine Key] (page 235) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 Density
a) In the "4H mode" and when [Fine Key] (page 235) is on, the setting value range is 0.00
to 4.00.
When drop border or shadow is selected: The setting parameter values
depend on the on/off setting of key drop and the selection of 4H mode/
8H mode (see page 213).
Adjustment
Width
Density
Adjustment
Top edge width
Left edge width
Right edge width
Bottom edge width
Density
Key Setting Operations Using Menus
Setting values
a)
0.00 to 8.00
b)
(0.00 to 100.00)
0.00 to 100.00
Setting values
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
0.00 to 100.00
233