Device Control Block (Joystick) - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Device Control Block (Joystick)

All functions of the joystick type device

control block are equivalent to the functions

of the trackball type, except that the

When the positioner operation mode is

By moving this, you can move the pattern

in the x-axis and y-axis directions.

When the three-dimensional transform

operation mode is enabled

By moving this, you can carry out

operations in the x-, y-, and z-axes.

When the following buttons are held down,

the joystick operation is switched to a finer

control. (fine mode)

• The button on the end of the joystick

• [SRC] button

Names and Functions of Parts of the Control Panel

trackball and Z-ring operations are carried

out with the joystick.

Region selection buttons

Operating buttons

• [TRGT] button

Depending on the settings made in the

Setup menu, the operation speed multiple

can be changed.

When the effect run control mode is

By moving the joystick sideways, you can

run the keyframe effect, independent of the

STOP NEXT KF, EFF LOOP, and similar

settings in the keyframe control block.

Move to the right to run the effect in the

normal direction, and to the left for the

reverse direction.