Key Setting Operations Using Menus; Key Setting Menus - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Key Setting Operations Using Menus

There are two ways of making key settings: either using menus, or using the

key control block or the Multifunction Flexi Pad control block.

This section describes basic procedures for making key settings using the

menus, taking the M/E-1 >Key1 menu as an example.

Operations in the Key menus are the same for all banks (M/E-1 to M/E-3 and

For details of the method of using the key control block, see "Key Setting

Operations With the Key Control Block" (page 249).

The key setting menus for each bank (M/E-1 to M/E-3 and PGM/PST) are as

When the signal format is 1080P, only keys 1 to 4 can be used.

Accessing a key setting menu

For example, to access the M/E-1 >Key1 menu, carry out any of the following

• In the menu control block, select the top menu selection button [M/E 1], then

press VF1 'Key1.'

If VF1 'Key5' is shown, press the [KEY1-4] switching button at the top of

the menu, turning it on, then press VF1 'Key1.'

Downstream keys 1 to 8

M/E-1 >Key1 to 8

M/E-2 >Key1 to 8

M/E-3 >Key1 to 8

M/E-4 >Key1 to 8

PGM/PST >DSK1 to 8

Key Setting Operations Using Menus