Snapshot Operations From the Numeric
Keypad Control Block
Saving and Recalling Snapshots
Snapshot operations with the numeric keypad control block use the following
buttons.
SNAPSHOT button
Region selection buttons
Saving a snapshot from the numeric keypad control block
1
Make the settings for the state you want to save as a snapshot.
2
In the numeric keypad control block, press the [SNAPSHOT] button,
turning it on.
This allocates the numeric keypad control block to snapshot operations,
and the [RCALL] button lights.
UNDO button
STORE STATS button
RCALL button
STORE button
Numeric keypad control block
Snapshot Operations From the Numeric Keypad Control Block
+/–/EFF DISS button
Display
CLR/AUTO
TRANS button
TRIM/GPI ENBL
button
Numeric keypad
851