Basic Independent Key Transition Operations
To set independent transitions for the keyers on the M/E or PGM/PST bank,
use the independent key transition control block.
1
2
194
Independent Key Transitions
Key source name display/key
snapshot buttons
Key delegation buttons
Independent key transition type
selection buttons
Independent key transition
execution section
Independent key transition control block (standard type)
Select one or more of the delegation buttons [KEY1] to [KEY4] ([DSK1]
to [DSK4] in the PGM/PST bank), turning them on.
You can press more than one button at the same time.
Notes
The buttons for [Key5] to [Key8] and [DSK5] to [DSK8] require previous
assignment in the Setup menu. For details, see "Assigning Buttons for
Selection of Keys 5 to 8 in the Setup Menu" (page 544).
Select the transition type.
To fade a key in or out: Press the [MIX] button, turning it on.
To insert or delete a key using a dedicated wipe pattern: Press the
[WIPE] button, turning it on.
To insert or delete a key using a dedicated DME wipe pattern: Press
the [DME] button, turning it on.
To instantaneously insert or remove the key: press the [CUT] button,
turning it on.
If, in the Setup menus, you set insertion and deletion as independent
modes, make the settings for the next transition in the independent key