Sony MVS-8000X User Manual page 974

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

An action set for a key frame is only executed when the key frame effect is

executed in the forward direction. It is important to remember that the action is

not executed in the reverse direction when executing simultaneously with

switcher and DME key frame effects.

Forcibly ending a macro timeline

• If the timeline has completed but a macro is still executing, press the

[REWIND] or [RUN] button in the key frame control block to forcibly end

the macro timeline.

• In a macro timeline, since a take operation is not possible, if a macro included

in the timeline has a pause event with a pause time of zero, the remainder of

the timeline after the pause is ignored, and the macro timeline ends at that

You can use the following editing functions on a register in which a macro

timeline is stored.

File-related functions

You can save and recall a created macro timeline as effect data, in the File

Timeline operations are carried out on a macro timeline in the same way as for

normal effects.

For details of timeline operations, see "Chapter 13 Keyframe Effects" (page

When using a macro timeline, note the following.

• To use a macro timeline, the Macro region must be assigned to a region

selection button in the numeric keypad control block.

Macro Timeline