Transition Control Block (Standard Type)
In the transition control block, you can
modify the output of the M/E bank or PGM/
PST bank, and perform transitions. Both
9 PRIOR SET button
1 Next transition selection buttons
8 Key status display
3 Transition execution section
4 Wipe direction selection buttons
common transition and independent key
transition operations are possible.
2 Transition type selection buttons
qf Key snapshot setting buttons
q; Key delegation buttons
qa Independent key transition type
7 KF button
6 Pattern limit buttons
5 TRANS PVW button
Names and Functions of Parts of the Control Panel
qd Key source name display/key
snapshot buttons
qs Independent key transition
execution section
selection buttons
59