Setting the Edit Points
To set the edit points, use any of the following operations in the keyframe
control block.
• To move the edit point to the keyframe immediately after the current time
(the position at which the effect is currently stopped), press the [NEXT KF]
button.
• To move the edit point to the keyframe immediately before the current time,
press the [PREV KF] button.
• To move the edit point to a keyframe specified by number, press the [GO TO
KF] button, then enter the keyframe number with the numeric keypad in the
numeric keypad control block or Multifunction Flexi Pad control block, and
press the [ENTER] button to confirm.
• To move the edit point to a specified timecode, press the [GO TO TC] button,
then enter the timecode value with the numeric keypad in the numeric
keypad control block, or Multifunction Flexi Pad control block and press the
[ENTER] button to confirm.
800
Specifying the Region and Edit Points
EDIT ENBL button
CONST DUR button
Buttons used for editing
Keyframe control block