Specifying The Key Output Destination; Key Modify Clear - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Specifying the Key Output Destination

Using the key processed keyer signals (external processed key)

To select the key processed keyer key fill and key source signals on the AUX

bus or edit preview bus, press [Ext Proc Key] turning it on, in the Processed

This assigns the key fill and key source signals for M/E-1 key 1 to reentry

signals PROC V and PROC K.

When a DME is selected on the keyer, the key fill and key source signals to

which a DME effect is applied are assigned.

You cannot select the PROC V and PROC K signals using the cross-point

selection buttons of the M/E or PGM/PST bank.

Using the key processed keyer signals or signals to which a DME

effect is applied in frame memory (frame memory feed)

To use the key processed keyer key fill and key source signals on the frame

memory source buses, in the Processed Key menu, press [FM Feed]. [Ext Proc

Key] turns on, and the key fill and key source signals processed on the

currently selected keyer are automatically assigned to frame memory source

buses 1 and 2. When a DME is selected on the keyer, the key fill and key source

signals to which a DME effect is applied are assigned.

A simple button operation or a menu operation returns the key settings to the

initial status settings.

Press [Default Recall] at the lower left of the menu display, turning it on, then

press the corresponding VF button (VF1 to VF4) to return the key settings to

their initial status.

For details of the initial status, see "Selecting the State After Powering On

(Start Up Menu)" in Chapter 18 (Volume 3).

For the menu operation to return the key state to that set in initial status, see

"Returning to default state in function groupings" (page 128).

Key Setting Operations Using Menus