Sony MVS-8000X User Manual page 269

However, it is first necessary to assign this channel on the DME to the
delegation (keyer or transition) to be monitored.
Selecting the DME channel
[DME1] to [DME8] buttons: Press one of these to select the corresponding
DME channel. The number of valid buttons depends on the number of
DME channels in use.
[DME MORE] button: If there are more than four DME channels in use, use
this to change the DME channel selection buttons displayed.
Returning the key adjustment values to their defaults
Holding down a key type button ([LUM], [LIN], [CRK], [CVK], or [PTN])
recalls the key default values.
Key modify clear
When the [KEY ADJ] button is held down, holding down the region selection
button for the selected region together returns all the key settings of the region
to the initial status settings.
When the [KEY ADJ] button is held down, holding down the button for the
selected key together returns the key settings to the initial status settings.
For details of the initial status, see "Selecting the State After Powering On
(Start Up Menu)" in Chapter 18 (Volume 3).
Key Adjustment Operations With the Multifunction Flexi Pad Control Block
269