Cross-Point Control Block (Ccp-6224/6324) In The Aux Operating Mode - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

one device control block (trackball), and

one Multifunction Flexi Pad control block.

a Cross-point control block

For details of operations, see "Cross-Point

Control Block" (page 55) and "CCP-6224

2M/E Control Panel" (page 107).

b Transition control block (compact

For details of operations, see "Transition

Control Block (Compact Type)" (page

Cross-Point Control Block (CCP-6224/6324) in the AUX

Operating Mode

On the CCP-6224/6324, when using a [24-

column] cross-point control block, if the

[PRE MCRO] button is assigned to switch

to AUX operating mode, by pressing this

button you can switch the control block

button functions as follows, and select the

Names and Functions of Parts of the Control Panel

1 Cross-point control block

c Device control block (track ball)

For details of operations, see "Device

Control Block (Trackball)" (page 70).

d Multifunction Flexi Pad control

For details of operations, see

"Multifunction Flexi Pad Control Block"

AUX bus and its source signals (AUX

panel-less function).

2Transition control block

(compact type)

4Multifunction Flexi Pad

control block

3Device control block

(track ball)