Dc Power Cable Specifications - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide

DC Power Cable Specifications

Related
Documentation
64
CAUTION: Before router installation begins, a licensed electrician must attach
a cable lug to the grounding and power cables that you supply. A cable with
an incorrectly attached lug can damage the router.
You must supply four DC power cables that meet the following specifications: 16-AWG
2
(1.3 mm ), minimum 60° C wire, or as required by the local code.
MX5, MX10, MX40, and MX80 Power System Description on page 35
Maintaining the MX5, MX10, MX40, and MX80 Power Supplies on page 161
Replacing an MX5, MX10, MX40, and MX80 DC Power Supply on page 143
MX5, MX10, MX40, and MX80 DC Power Electrical Safety Guidelines
MX5, MX10, MX40, and MX80 Routers DC Power Specifications on page 59
Power Consumption for a DC-Powered MX5, MX10, MX40, and MX80 Router on page 60
DC Power Circuit Breaker Requirements for the MX5, MX10, MX40, and MX80 Routers
on page 62
DC Power Source Cabling for MX5, MX10, MX40, and MX80 Routers on page 62
Copyright © 2017, Juniper Networks, Inc.