MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Related
Documentation
Replacing an MX5, MX10, MX40, and MX80 AC Power Supply
Removing an MX5, MX10, MX40, and MX80 AC Power Supply
136
Figure 59: Installing an AC Power Supply
MX5, MX10, MX40, and MX80 Power System Description on page 35
Removing an MX5, MX10, MX40, and MX80 AC Power Supply on page 136
MX5, MX10, MX40, and MX80 Routers AC Power Specifications on page 53
AC Power Circuit Breaker Requirements for the MX5, MX10, MX40, and MX80 Router
on page 56
AC Power Cord Specifications for MX5, MX10, MX40, and MX80 Routers on page 56
Preventing Electrostatic Discharge Damage to an MX5, MX10, MX40, and MX80 Router
on page 194
Video:
Replacing an MX5, MX10, MX40, and MX80 AC Power Supply
Removing an MX5, MX10, MX40, and MX80 AC Power Supply on page 136
Installing an MX5, MX10, MX40, and MX80 AC Power Supply on page 138
Before you remove a power supply, be aware of the following:
NOTE:
The minimum number of power supplies must be present in the router
at all times.
CAUTION:
To maintain proper cooling and prevent thermal shutdown of the
operating power supply unit, each power supply slot must contain either a
Copyright © 2017, Juniper Networks, Inc.