Installing An Mx5, Mx10, Mx40, And Mx80 Fan Tray; Figure 44: Installing The Air Filter - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Related
Documentation

Installing an MX5, MX10, MX40, and MX80 Fan Tray

110
Press the tab on the rear of the fan tray to allow the air filter to slide into place.
4.
Release the tab to secure the air filter.
5.

Figure 44: Installing the Air Filter

1— Inserting the air filter into the fan tray
MX5, MX10, MX40, and MX80 Cooling System Description on page 19
Maintaining the MX5, MX10, MX40, and MX80 Air Filter on page 158
Preventing Electrostatic Discharge Damage to an MX5, MX10, MX40, and MX80 Router
on page 194
To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis.
2.
Tighten the captive screw on the fan tray faceplate to secure it in the chassis.
3.
2
1
Air filter
Angle the filter
under this tab first.
2— Securing the air filter in the fan tray
Figure 45 on page 111):
Copyright © 2017, Juniper Networks, Inc.