Mx5, Mx10, Mx40, And Mx80 Baseboard Description; Chassis Components And Descriptions; Figure 9: Front View Of The Mx80 Router (Modular Chassis); Figure 10: Rear View Of The Mx5, Mx10, Mx40, And Mx80 Routers - Juniper MX10 Hardware Manual

Related
Documentation

MX5, MX10, MX40, and MX80 Baseboard Description

Copyright © 2017, Juniper Networks, Inc.

Figure 9: Front View of the MX80 Router (Modular Chassis)

ESD MIC slots
point
AC power supplies

Figure 10: Rear View of the MX5, MX10, MX40, and MX80 Routers

MIC
slot
Clock Sync
port port
NOTE: The port labeled
SYNC provides 1 PPS output.
MX5, MX10, MX40, and MX80 Router Overview on page 3
MX5, MX10, MX40, and MX80 Router Models on page 5
MX5, MX10, MX40, and MX80 Routers Physical Specifications on page 41
The baseboard is located in the center of the chassis and forms the rear of the MIC card
cage. The baseboard is not replaceable. The MICs and power supplies install into the
baseboard from the front of the chassis. Data packets are transferred across the
baseboard from the MIC to the Packet Forwarding Engine, and from the Packet Forwarding
Engine across the baseboard to the destination MIC.
Chapter 2: Chassis Components and Descriptions
Front panel Fan
Protective ESD
earthing terminal point
provides 10 Mhz output. The port labeled
CLOCK
11