Troubleshooting The Mx5, Mx10, Mx40, And Mx80 Mics; Troubleshooting The Mx5, Mx10, Mx40, And Mx80 Power Supplies - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Related
Documentation

Troubleshooting the MX5, MX10, MX40, and MX80 MICs

Problem
Solution
Related
Documentation

Troubleshooting the MX5, MX10, MX40, and MX80 Power Supplies

Problem
170
MX5, MX10, MX40, and MX80 Cooling System Description on page 19
Maintaining the MX5, MX10, MX40, and MX80 Fan Tray on page 158
Replacing an MX5, MX10, MX40, and MX80 Fan Tray on page 111
show chassis fan
show chassis alarms
show chassis temperature-thresholds
Description: The MICs are not functioning normally.
Check the status of each port on a MIC by looking at the LED located on the MIC
faceplate. For information about the meaning of LED states on different MICs, see the
MX Series Interface Module Reference
Check the status of a MIC by issuing the
MIC slots in the MX5, MX10, MX40, and modular MX80 router are labeled
1/MIC 1 . The fixed MIC is labeled
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
For further description of the output from the command, see the
MX5, MX10, MX40, and MX80 Modular Interface Card Description on page 23
Maintaining the MX5, MX10, MX40, and MX80 MICs on page 159
Replacing an MX5, MX10, MX40, and MX80 MIC on page 118
show chassis fpc
Description: The power supply is not functioning normally.
.
show chassis fpc pic-status
0/MIC 0 .
4x 10GE XFP
1x 10GE XFP
1x 10GE XFP
1x 10GE XFP
1x 10GE XFP
1x 10GE XFP
1x 10GE XFP
CLI command. The
1/MIC 0
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.
and