Juniper MX10 Hardware Manual page 194

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Related
Documentation
172
NOTE: If the cause of power failure is due to lightening, power off the power
supply module and then power it on again. If the power supply module is
working properly, it comes back with its LED in the green state. If there are
no abnormal causes for the power supply module failure, or if the power
supply module LED is still red after powering off and powering on again, then
try reseating the power supply module and if it does not work, then try to
install it in a different slot.
MX5, MX10, MX40, and MX80 Power System Description on page 35
MX5, MX10, MX40, and MX80 Power Supply LED on page 38
Maintaining the MX5, MX10, MX40, and MX80 Power Supplies on page 161
Replacing an MX5, MX10, MX40, and MX80 AC Power Supply on page 136
show chassis environment pem
show chassis alarms
Copyright © 2017, Juniper Networks, Inc.