Router; Ac Power Cord Specifications For Mx5, Mx10, Mx40, And Mx80 Routers; Table 28: Ac Power Cord Specifications - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
AC Power Circuit Breaker Requirements for the MX5, MX10, MX40, and MX80 Router
Related
Documentation

AC Power Cord Specifications for MX5, MX10, MX40, and MX80 Routers

Table 28: AC Power Cord Specifications

Country
Australia
China
56
AC Power Circuit Breaker Requirements for the MX5, MX10, MX40, and MX80 Router
on page 56
AC Power Cord Specifications for MX5, MX10, MX40, and MX80 Routers on page 56
We recommend that you use a dedicated customer site circuit breaker rated for
15 A (110 VAC) minimum or 10 A (220 VAC) minimum for each AC power feed, or as
required by local code. Doing so enables you to operate the router in any configuration
without upgrading the power infrastructure.
MX5, MX10, MX40, and MX80 Power System Description on page 35
Maintaining the MX5, MX10, MX40, and MX80 Power Supplies on page 161
Replacing an MX5, MX10, MX40, and MX80 AC Power Supply on page 136
Power Consumption for an AC-Powered MX5, MX10, MX40, and MX80 Router on
page 54
AC Power Electrical Safety Guidelines and Warnings for MX5, MX10, MX40, and MX80
Routers
AC Power Cord Specifications for MX5, MX10, MX40, and MX80 Routers on page 56
Each AC power supply has a single AC appliance inlet located on the power supply that
requires a dedicated AC power feed. Most sites distribute power through a main conduit
that leads to frame-mounted power distribution panels, one of which can be located at
the top of the rack that houses the router. An AC power cord connects each power supply
to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C13 appliance coupler at the female end of the cord
inserts into the AC appliance inlet coupler, type C14 as described by International
Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the
power cord fits into the power source receptacle that is standard for your geographic
location.
Table 28 on page 56 provides specifications on the AC power cord provided for each
country or region.
Model Number
CBL-JX-PWR-AU
CBL-JX-PWR-CH
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
Plug Type
AS/NZ 3112–1993
GB2099.1 1996 and GB1002
1996 (CH1-10P)
Copyright © 2017, Juniper Networks, Inc.