Front Panel Components; Figure 13: Front Panel On The Modular Mx5, Mx10, Mx40, And Mx80 Routers - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide

Front Panel Components

14
Figure 13: Front Panel on the Modular MX5, MX10, MX40, and MX80
Routers
Alarm Routing Console
LEDs Engine port
LED
System
status
LED
ONLINE/
OFFLINE
ONLINE/ Auxiliary USB
Reset
OFFLINE button port port
button
Each front panel consists of the following components:
Interface ports—The
AUX
management devices. Each Routing Engine has one 1-Gbps Ethernet port for connecting
to a management network and two asynchronous serial ports—one for connecting to
a console and one for connecting to a modem or other auxiliary device.
Two ports for primary and secondary BITS clock input—Available on the modular MX80
chassis.
One fixed 10-Gigabit Ethernet MIC with four ports for uplink connections. For more
information see "MX5, MX10, MX40, and MX80 Modular Interface Card Description"
on page 23.
port—Provides a removable media interface through which you can install the
USB
Junos OS manually. (See
Router online/offline button—Takes the router online or offline when pressed.
Reset button—Reboots the Routing Engine when pressed.
LEDs—Indicate component and system status and troubleshooting information at a
glance.
Ethernet
port
Clock
ports 10-Gigabit Ethernet MIC
, , and
CONSOLE ETHERNET
Figure 14 on page 15.) Junos OS supports USB version 1.0.
ports provide access to
Copyright © 2017, Juniper Networks, Inc.