Link Leds On The Front Panel; Routing Engine Led On The Front Panel; System Led On The Front Panel; Table 9: Link Leds On The Front Panel - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide

Link LEDs on the Front Panel

Routing Engine LED on the Front Panel

System LED on the Front Panel

Table 11: System LED on the Front Panel

Label
SYS OK
Related
Documentation
16
The front panel has a 10-Gigabit Ethernet MIC with four ports for uplink connections.
Each port has one LINK LED located to the right of the port.
the link LEDs in more detail.

Table 9: Link LEDs on the Front Panel

Label Color
Green
LINK
–
One LED on the left side of the front panel indicates the status of the Routing Engine.
The LED is located below the
LED in more detail.

Table 10: Routing Engine LED on the Front Panel

Label Color
Green
LINK
Red
–
One LED on the left side of the front panel indicates the status of the router. The LED is
located below the
SYS OK
detail.
Color State
Green On steadily
— Off
Alarm LEDs on the MX5, MX10, MX40, and MX80 Front Panel on page 15
Troubleshooting Resources for MX5, MX10, MX40, and MX80 Routers on page 167
Troubleshooting the MX5, MX10, MX40, and MX80 Fan Tray on page 169
Troubleshooting the MX5, MX10, MX40, and MX80 MICs on page 170
State Description
On steadily Link is up.
Off No link.
RE label. Table 10 on page 16
State Description
Blinking Routing Engine is transitioning online.
Blinking Routing Engine has failed.
Off Routing Engine is functioning normally.
label. Table 11 on page 16 describes the system LED in more
Description
Routing Engine is functioning normally.
Routing Engine is transitioning online.
Table 9 on page 16 describes
describes the Routing Engine
Copyright © 2017, Juniper Networks, Inc.