MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Installing an MX5, MX10, MX40, and MX80 Fan Tray
Related
Documentation
112
Press the latch located on the inside of the fan tray to release it from the chassis.
4.
Place one hand under the fan tray to support it, and pull the fan tray completely out
5.
of the chassis.
Figure 46: Removing the Fan Tray
To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis.
2.
Tighten the captive screw on the fan tray faceplate to secure it in the chassis.
3.
Figure 47: Installing the Fan Tray
MX5, MX10, MX40, and MX80 Cooling System Description on page 19
Replacing an MX5, MX10, MX40, and MX80 Air Filter on page 108
Maintaining the MX5, MX10, MX40, and MX80 Fan Tray on page 158
Preventing Electrostatic Discharge Damage to an MX5, MX10, MX40, and MX80 Router
on page 194
Figure 45 on page
111):
Copyright © 2017, Juniper Networks, Inc.