Specifications; Figure 27: Mx5, Mx10, Mx40, And Mx80 Chassis Dimensions And Clearance - Juniper MX10 Hardware Manual

MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide
Related
Documentation
MX5, MX10, MX40, and MX80 Routers Cabinet Requirements and Specifications
48
both in front of and behind the router. NEBS GR-63 recommends that you allow at
least 30 in. (76.2 cm) in front of the rack and 24 in. (61 cm) behind the router.
Figure 27: MX5, MX10, MX40, and MX80 Chassis Dimensions and
Clearance Requirements
24" (61 cm)
clearance required
Cable
management
bracket
Front of chassis
19.2"
(48.7 cm)
Front-mounting flange
MX5, MX10, MX40, and MX80 Site Preparation Checklist on page 44
MX5, MX10, MX40, and MX80 Rack Requirements on page 46
MX5, MX10, MX40, and MX80 Installation Summary on page 50
Installing MX5, MX10, MX40, and MX80 Chassis in the Rack on page 85
MX5, MX10, MX40, and MX80 Routers Physical Specifications on page 41
Table 22 on page 49 summarizes cabinet requirements and specifications for MX5, MX10,
MX40, and MX80 routers.
23.46"
(59.6cm)
30" (76.2 cm)
20.2"
clearance recommended for
(51.3 cm)
maintenance
17.5"
(44.5 cm)
Copyright © 2017, Juniper Networks, Inc.
Rear of chassis