Snmp-Server Vacm View - SMC Networks EliteConnect SMCE21011 User Manual

D
All traps enabled
C
Global Configuration
C
This command is used in conjunction with the snmp-server host and
snmp-server enable server commands to enable SNMP notifications.
E
This command configures SNMP v3 vacm views. Use the no form to delete
snmp-server vacm
an SNMP v3 view or remove a subtree from a filter.
view
S
D
None
C
Global Configuration
C
◆
sysSystemDown - The access point is about to shutdown and
reboot.
sysSystemUp - The access point is up and running.
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
AP(config)#no snmp-server trap dot11StationAssociation
AP(config)#
YNTAX
snmp-server vacm view <name> [included | excluded] <subtree>
[mask <mask>]
name - A user-defined name that identifies an SNMP v3 view.
(Maximum length: 32 characters)
include - Defines a filter type that includes objects in the MIB
subtree.
exclude - Defines a filter type that excludes objects in the MIB
subtree.
subtree - The part of the MIB subtree that is to be filtered.
mask - An optional hexadecimal value bit mask to define objects in
the MIB subtree.
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
The access point allows up to 10 notification filters to be created. Each
filter can be defined by up to 20 MIB subtree ID entries.
– 159 –
| SNMP Commands
C 17
HAPTER