Table of Contents
Advertisement
D
EFAULT
All enabled
C
OMMAND
Global Configuration
E
XAMPLE
This example restricts management access to the indicated addresses.
AP(config)#apmgmtui SNMP enable
AP(config)#
This command shows the AP management configuration, including the IP
show
addresses of management stations allowed to access the access point, as
apmanagement
well as the interface protocols which are open to management access.
C
OMMAND
Exec
E
XAMPLE
AP#show apmanagement
Management AP Information
=================================
AP Management IP Mode: Any IP
Telnet UI: Enable
WEB UI
SNMP UI
==================================
AP#
This command displays basic system configuration settings.
show system
D
EFAULT
None
C
OMMAND
Exec
E
XAMPLE
AP#show system
System Information
==========================================================
Serial Number
System Up time
System Name
System Location
System Contact
C
S
ETTING
M
ODE
M
ODE
: Enable
: Enable
S
ETTING
M
ODE
: A123456789
: 0 days, 4 hours, 33 minutes, 29 seconds
: SMC
:
:
– 137 –
| System Management Commands
13
HAPTER
System Management Commands
Advertisement
Table of Contents
