Address Filter Delete - SMC Networks EliteConnect SMCE21011 User Manual

| MAC Address Authentication Commands
C 21
HAPTER
address filter entry

address filter delete

R C
ELATED OMMANDS
address filter entry (178)
This command enters a MAC address in the filter table.
S
YNTAX
address filter entry <mac-address> <allowed | denied>
mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens; e.g., 00-90-D1-12-AB-
89.)
allowed - Entry is allowed access.
denied - Entry is denied access.
D
EFAULT
None
C M
OMMAND ODE
Global Configuration
C M
OMMAND ODE
The access point supports up to 1024 MAC addresses.
◆
◆ An entry in the address table may be allowed or denied access
depending on the global setting configured for the address entry
default command.
E
XAMPLE
AP(config)#address filter entry 00-70-50-cc-99-1a allowed
AP(config)#
R C
ELATED OMMANDS
address filter default (177)
This command deletes a MAC address from the filter table.
S
YNTAX
address filter delete <mac-address>
mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens.)
D
EFAULT
None
– 178 –