Key Hardware Components; Figure 2: Bottom Panel View - SMC Networks SMC2891W-AN Installation Manual

802.11a/b/g/n outdoor dual band wireless access point
Hide thumbs Also See for SMC2891W-AN:
Table of Contents

Advertisement

Chapter 1
| Access Point Overview
Hardware Description
Key Hardware
Components
1
2
1
Built-in 5 GHz Antenna (SMC2891W-AN only)
2
Console Port with Waterproof Cover
3
Back Panel System LEDs (Not Visible in Figure)
The SMC2890W-AN/SMC2891W-AN consists of serveral key harware components.
This manual describes each specific component, or related components, together
with their installation requirements and procedures in each chapter. To understand
each component in detail, refer to the relevant section.

Figure 2: Bottom Panel View

3
Built-in 5 GHz Antenna
The SMC2891W-AN AP includes an integrated 5 GHz antenna. For more
information, see
"How to Align Antennas" on page
Console Port
The port labeled "Console" provides an out-of-band serial connection to a terminal
or a PC running terminal emulation software. The port can be used for performing
unit monitoring and configuration. For more information, see
the Console Port" on page
RJ-45 PoE Port
The RJ-45 port labeled "PoE" provides a 1000BASE-T data and Power-over-Ethernet
(PoE) power connection to the unit. For more information, see
the RJ-45 Port" on page
4
4
RJ-45 PoE Port
5
Water-Tight Test Point (DO NOT REMOVE)
45.
37.
– 12 –
5
28.
"How to Connect to
"How to Connect to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc2890w-an

Table of Contents