System Management Commands; Table 9: System Management Commands - SMC Networks EliteConnect SMCE21011 User Manual

13
S M
YSTEM ANAGEMENT
S M
YSTEM ANAGEMENT
C
OMMANDS
These commands are used to configure the user name, password, system
logs, browser management options, clock settings, and a variety of other
system information.

Table 9: System Management Commands

Command Function
Country Setting
country Sets the access point country code
Device Designation
prompt Customizes the command line prompt
system name Specifies the host name for the access point
Management Access
username Configures the user name for management access
password Specifies the password for management access
ip ssh-server enable Enables the Secure Shell server
ip ssh-server port Sets the Secure Shell port
ip telnet-server Enables the Telnet server
enable
APmgmtIP Specifies an IP address or range of addresses
allowed access to the management interface
APmgmtUI Enables or disables SNMP, Telnet or web
management access
show Shows the AP management configuration
APmanagement
Web Server
ip http port Specifies the port to be used by the web browser
interface
ip http server Allows the access point to be monitored or
configured from a browser
ip https port Specifies the UDP port number used for a secure
HTTP connection to the access point's Web interface
ip https server Enables the secure HTTP server on the access point
System Status
show system Displays system information
show version Displays version information for the system
– 127 –
C
OMMANDS
Mode Page
Exec 128
GC 129
GC 130
GC 130
GC 131
IC-E 131
IC-E 132
IC-E 132
GC 135
GC 136
Exec 137
GC 133
GC 133
GC 134
GC 134
Exec 137
Exec 138