Snmp-Server Location; Snmp-Server Enable Server - SMC Networks EliteConnect SMC2552W-G2 User Manual

7
Command Line Interface
Command Mode
Global Configuration
Example
Enterprise AP(config)#snmp-server contact Paul
Enterprise AP(config)#
Related Commands

snmp-server location (7-43)

snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Enterprise AP(config)#snmp-server location WC-19
Enterprise AP(config)#
Related Commands
snmp-server contact (7-42)

snmp-server enable server

This command enables SNMP management access and also enables this device to
send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and
trap messages.
Syntax
snmp-server enable server
no snmp-server enable server
Default Setting
Enabled
7-42