Description - SMC Networks EliteConnect SMCE21011 User Manual

| Wireless Interface Commands
C 26
HAPTER

description

ssid
This command adds a description to a the wireless interface. Use the no
form to remove the description.
S
YNTAX
description <string>
no description
string - Comment or a description for this interface.
(Range: 1-80 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Interface Configuration (Wireless-VAP)
E
XAMPLE
AP(if-wireless g: VAP[0])#description RD-AP#3
AP(if-wireless g: VAP[0])#
This command configures the service set identifier (SSID).
S
YNTAX
ssid <string>
string - The name of a basic service set supported by the access
point. (Range: 0 - 7 characters)
D S
EFAULT ETTING
802.11a Radio: VAP_TEST_11A (0 to 3)
802.11g Radio: VAP_TEST_11G (0 to 3)
C M
OMMAND ODE
Interface Configuration (Wireless-VAP)
C U
OMMAND SAGE
Clients that want to connect to the wireless network via an access point
must set their SSIDs to the same as that of the access point.
E
XAMPLE
AP(if-wireless g: VAP[0])#ssid RD-AP#3
AP(if-wireless g)#
– 212 –