Table of Contents
Advertisement
| Filtering Commands
C
22
HAPTER
filter ethernet-type
enabled
filter ethernet-type
protocol
D
EFAULT
Disabled
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
AP(config)#filter acl-source-address add xx:xx:xx:xx:xx:xx
AP(config)#
This command checks the Ethernet type on all incoming and outgoing
Ethernet packets against the protocol filtering table. Use the no form to
disable this feature.
S
YNTAX
filter ethernet-type enabled
no filter ethernet-type enabled
D
EFAULT
Disabled
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
This command is used in conjunction with the filter ethernet-type
protocol command to determine which Ethernet protocol types are to be
filtered.
E
XAMPLE
AP(config)#filter ethernet-type enabled
AP(config)#
R
C
ELATED
OMMANDS
filter ethernet-type protocol (184)
This command sets a filter for a specific Ethernet type. Use the no form to
disable filtering for a specific Ethernet type.
S
YNTAX
filter ethernet-type protocol <protocol>
no filter ethernet-type protocol <protocol>
protocol - An Ethernet protocol type. (Options: ARP, RARP,
Berkeley-Trailer-Negotiation, LAN-Test, X25-Level-3, Banyan, CDP,
– 184 –
Advertisement
Table of Contents
