Sntp-Server Date-Time - SMC Networks EliteConnect SMCE21011 User Manual

sntp-server enable
sntp-server date-
time
E
XAMPLE
AP(config)#sntp-server ip 10.1.0.19
AP#
R C
ELATED OMMANDS
sntp-server enable (149)
show sntp (151)
This command enables SNTP client requests for time synchronization with
NTP or SNTP time servers specified by the sntp-server ip command. Use
the no form to disable SNTP client requests.
S
YNTAX
sntp-server enable
no sntp-server enable
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the access point only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
E
XAMPLE
AP(config)#sntp-server enable
AP(config)#
R C
ELATED OMMANDS
sntp-server ip (148)
show sntp (151)
This command sets the system clock.
D S
EFAULT ETTING
00:14:00, January 1, 1970
C M
OMMAND ODE
Global Configuration
E
XAMPLE
This example sets the system clock to 17:37 June 19, 2003.
– 149 –
| System Clock Commands
C 15
HAPTER