Table of Contents
Advertisement
The access point allows up to 10 SNMP v3 users to be configured. Each
SNMP
3 U
V
SERS
SNMPv3 user is defined by a unique name. Users must be configured with a
specific security level and assigned to a group. The SNMPv3 group restricts
users to a specific read, write, or notify view.
Figure 33: Configuring SNMPv3 Users
The following items are displayed on this page:
User Name — The SNMPv3 user name. (32 characters maximum)
◆
Group — The SNMPv3 group name.
◆
Auth Type — The authentication type used for the SNMP user; either
◆
MD5 or none. When MD5 is selected, enter a password in the
corresponding Passphrase field.
Auth Passphrase — The authentication password or key associated
◆
with the authentication and privacy settings. A minimum of eight plain
text characters is required.
Priv Type — The data encryption type used for the SNMP user; either
◆
DES or none. When DES is selected, enter a key in the corresponding
Passphrase field.
Priv Passphrase — The password or key associated with the
◆
authentication and privacy settings. A minimum of eight plain text
characters is required.
Action — Click the Add button to add a new user to the list. Click the
◆
edit button to change details of an existing user. Click the Del button to
remove a user from the list.
N
OTE
levels. For example, a user who has "Auth Type" and "Priv Type" configured
to MD5 and DES respectively (that it, uses both authentication and data
encryption) must be assigned to the RWPriv group. If this same user were
instead assigned to the read-only (RO) group, the user would not be able
to access the database.
Users must be assigned to groups that have the same security
:
– 73 –
| Management Settings
C
6
HAPTER
Simple Network Management Protocol
Advertisement
Table of Contents
