Link Layer Discovery Commands; Table 26: Link Layer Discovery Commands - SMC Networks EliteConnect SMCE21011 User Manual

28
lldp service
L L
INK AYER
LLDP allows devices in the local broadcast domain to share information
about themselves. LLDP-capable devices periodically transmit information
in messages called Type Length Value (TLV) fields to neighbor devices.
Advertised information is represented in Type Length Value (TLV) format
according to the IEEE 802.1ab standard, and can include details such as
device identification, capabilities and configuration settings.
This information can be used by SNMP applications to simplify
troubleshooting, enhance network management, and maintain an accurate
network topology.

Table 26: Link Layer Discovery Commands

Command Function
lldp service Enables the transmission of LLDP
information
lldp transmit hold- Sets the message transmission hold time
muliplier
lldp transmit interval Sets the message transmission interval
time
lldp transmit re-init-delay Sets the reinitial delay time
lldp transmit delay-to- Sets the transmission delay value
local-change
show lldp Shows the current LLDP information
This command enables LLDP on the access point. Use the no form to
disable LLDP.
S
YNTAX
[no] link-integrity ping-detect
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# lldp service
AP(config)#
– 228 –
D
ISCOVERY
C
OMMANDS
Mode Page
GC 228
GC 229
GC 229
GC 229
GC 230
Exec 230