| Advanced Settings
C
7
HAPTER
Access Control Lists
E
T
THERNET
YPE
The following items are displayed on this page:
DA Status — Enables/disables the destination address to be filtered.
◆
MAC Address — Specifies a destination MAC address to filter, in the
◆
form xx.xx.xx.xx.xx.xx.
Action — Selecting "Add" adds a new MAC address to the filter list,
◆
selecting delete deletes the specified MAC address.
Number — Specifies the number associated with the MAC address, up
◆
to a maximum of eight.
MAC Address — Displays the configured destination MAC address.
◆
◆
Set — Applies the new parameters and saves them to RAM memory.
Also prompts a screen to inform you when it has taken affect. Clicking
'OK' returns to the home page. Changes will not be saved upon a
reboot unless the running configuration file is saved.
Cancel — Cancels the newly entered settings and restores the
◆
originals.
◆
Help — Prompts the help window to appear.
The Ethernet Type Filter controls checks on the Ethernet type of all
incoming and outgoing Ethernet packets against the protocol filtering table.
(Default: Disabled)
– 80 –