SMC Networks EliteConnect SMCE21011 User Manual page 10

802.11b/g/n ap
Hide thumbs Also See for EliteConnect SMCE21011:
Table of Contents

Advertisement

A
T
G
BOUT
HIS
UIDE
In Italy the end-user must apply for a license from the national
spectrum authority to operate this device outdoors.
In Belgium outdoor operation is only permitted using the 2.46 - 2.4835
GHz band: Channel 13.
In France outdoor operation is only permitted using the 2.4 - 2.454 GHz
band: Channels 1 - 7.
The user must use the configuration utility provided with this
N
:
OTE
product to ensure the channels of operation are in conformance with the
spectrum usage rules for European Community countries as described
below.
This device requires that the user or installer properly enter the current
country of operation in the command line interface as described in the
user guide, before operating this device.
This device will automatically limit the allowable channels determined
by the current country of operation. Incorrectly entering the country of
operation may result in illegal operation and may cause harmful
interference to other systems. The user is obligated to ensure the
device is operating according to the channel limitations, indoor/outdoor
restrictions and license requirements for each European Community
country as described in this document.
This device employs a radar detection feature required for European
Community operation in the 5 GHz band. This feature is automatically
enabled when the country of operation is correctly configured for any
European Community country. The presence of nearby radar operation
may result in temporary interruption of operation of this device. The
radar detection feature will automatically restart operation on a channel
free of radar.
The 5 GHz Turbo Mode feature is not allowed for operation in any
European Community country. The current setting for this feature is
found in the 5 GHz 802.11a Radio Settings Window as described in the
user guide.
The 5 GHz radio's Auto Channel Select setting described in the user
guide must always remain enabled to ensure that automatic 5 GHz
channel selection complies with European requirements. The current
setting for this feature is found in the 5 GHz 802.11a Radio Settings
Window as described in the user guide.
This device is restricted to indoor use when operated in the European
Community using the 5.15 - 5.35 GHz band: Channels 36, 40, 44, 48,
52, 56, 60, 64. See table below for allowed 5 GHz channels by country.
This device may be operated indoors or outdoors in all countries of the
European Community using the 2.4 GHz band: Channels 1 - 13, except
where noted below.
– 10 –

Advertisement

Table of Contents
loading

Table of Contents