Vacm View - SMC Networks EliteConnect SMCE21011 User Manual

show snmp vacm
group / show snmp

vacm view

This command displays the SNMP v3 notification filter settings.
S
YNTAX
show snmp filter [filter-id]
filter-id - A user-defined name that identifies an SNMP v3
notification filter. (Maximum length: 32 characters)
C M
OMMAND ODE
Exec
E
XAMPLE
AP#show snmp filter
Filter: trapfilter
Type: include
Subtree: iso.3.6.1.2.1.2.2.1
Type: exclude
Subtree: iso.3.6.1.2.1.2.2.1.1.23
=============================
AP#show snmp
This command displays the SNMP configuration settings.
C M
OMMAND ODE
Exec
E
XAMPLE
AP#show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId :80:00:07:e5:80:00:00:2e:62:00:00:00:18
EngineBoots:1
Trap Destinations:
1: 192.168.1.9, Community: *****, State: Enabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
dot11InterfaceAGFail
dot11StationAssociation
Enabled
dot11StationReAssociation
Enabled
dot1xAuthFail Enabled
dot1xAuthSuccess Enabled
dot1xMacAddrAuthSuccess
Enabled
– 165 –
C
HAPTER
: Enable
: *****
: *****
: WC-19
: Paul
Enabled dot11InterfaceBFail
Enabled dot11StationAuthentication
Enabled dot11StationRequestFail
dot1xAuthNotInitiated
dot1xMacAddrAuthFail
Enabled iappContextDataSent
| SNMP Commands
17
Enabled
Enabled
Enabled