Figure 41: Spanning Tree Protocol
Sets STP bridge link parameters.
B
RIDGE
The following items are displayed on the STP page:
Spanning Tree Protcol — Enables/disables STP on the wireless
◆
bridge. (Default: Enabled)
Priority — Used in selecting the root device, root port, and designated
◆
port. The device with the highest priority becomes the STP root device.
However, if all devices have the same priority, the device with the
lowest MAC address will then become the root device. (Note that lower
– 83 –
| Wireless Settings
C
8
HAPTER
Spanning Tree Protocol (STP)