Table of Contents
Advertisement
| VLAN Commands
C
29
HAPTER
vlan-id
This command configures the default VLAN ID for the VAP interface.
S
YNTAX
vlan-id <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-4094)
D
S
EFAULT
ETTING
1
C
M
OMMAND
ODE
Interface Configuration (Wireless-VAP)
C
U
OMMAND
SAGE
◆
To implement the default VLAN ID setting for VAP interface, the access
point must enable VLAN support using the vlan command.
When VLANs are enabled, the access point tags frames received from
◆
wireless clients with the default VLAN ID for the VAP interface. If IEEE
802.1X is being used to authenticate wireless clients, specific VLAN IDs
can be configured on the RADIUS server to be assigned to each client.
Using IEEE 802.1X and a central RADIUS server, up to 64 VLAN IDs can
be mapped to specific wireless clients.
If the VLAN ID has not been configured for a client on the RADIUS
◆
server, then the frames are tagged with the default VLAN ID of the VAP
interface.
E
XAMPLE
AP(if-wireless g: VAP[0])#vlan-id 3
AP(if-wireless g: VAP[0])#
– 234 –
Advertisement
Table of Contents
